Evol Technology Pro-Lock clip-ons for ’20 BMW S1000RR

E/T clip-ons for the K67 are indeed different by design.  They maintain correct bar position while integrating seemlessly with the OEM triple clamp, providing adjustability, a rotational lock, and high crash durability.  Additionally, they are hinged for installation and removal without removal of the upper triple clamp.

The bar attaches to a hinged fork clamp, separate from the OEM upper triple and the upper triple outer clamp piece.  In this manner, they are similar to our other clip-ons, with their hinged clamp.  The hinged clamp facilitates swapping the clip-on assembly without removing the upper triple clamp.  Bar placement is 10mm forward of OE but at the same 7-degree downward angle.  Billet upper triple outer clamp pieces are included with our clip-ons.  Standing apart from all others, our clip-ons interlock with a slotted feature on our outer triple clamp pieces , allowing them to be locked in position so that the clip-ons themselves don’t have to be over-torqued to prevent rotation.  This locking feature also adds to the crash robustness of our clip-ons, since the bars are secured both above and below the triple clamp.

The Evol Technology K67 Pro-Lock clip-on handlebar kit comes pre-assembled with bars, hinge-style fork tube clamps, billet upper triple clamp outer pieces, handlebar end-plugs, all mounting hardware, and installation instructions.  They were developed in-house, hand-in-hand with Michael Godin of KWS Motorsports and can be found on MotoAmerica racer Travis Wyman’s Weir Everywhere Racing BMW K67.  Be the first on your grid with Evol Technology Pro-Lock clip-ons for the K67 BMW S1000RR, and dominate with us.