Brembo .484 Cafe 108mm Billet Caliper Kit

The new Brembo “.484” caliper aims to meet the needs of those who want to improve their braking system performance, giving the bike a strong Café Racer connotation.

This caliper is made entirely from billet, starting with a block of aluminium machined with the most modern Cam technologies available. The two semi-calipers are then joined with three steel screws located within the wheel side. The caliper body houses four 32 mm diameter pistons.
The name “.484” is derived from the displacement of an individual caliper piston measured in cubic inches, typical of the VTwin market. Finishing of the caliper is obtained with an anthracite black hard oxidation treatment, whereas the prominent Brembo logo, in its characteristic red colour, is placed at the top of the piston on the disc entry side.

This caliper uses radial mounting technology in order to guarantee maximum operating precision. The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
The pair of calipers comes in a kit that includes pre-mounted sintered brake pads, an instruction sheet and a pair of Brembo stickers.

PLEASE NOTE: This is a universal caliper kit. Please confirm your bike accepts 108mm calipers before ordering. Your application may require spacers, please contact us for help in that regard. 

Features:

- Set of 2 calipers

- Interchangeable with OE calipers

- Nickel coating caliper body

- 4x32mm piston diameter

- Sintered pads

- Machined from billet

- Dust seal for street use