Please Select Your Motorcycle
We will show you products that fit your motorcycle
Graves Motorsports 2015-17 Yamaha YZF-R1 / R1M Short Cat Eliminator Titanium Exhaust System
Product Code: EXY-15R1-CETT-2
Availability: In Stock
Graves Motorsports 2015-2016 Yamaha R1 Cat Eliminator Titanium Exhaust System with Titanium 200mm silencer. GMS Exhaust systems are designed for the elite rider seeking top of the line performance, fit, finish and value. This R1 exhaust system was developed using the same technology that has powered Monster Energy Graves Yamaha riders to 7 straight consecutive Moto America / AMA Superbike championships along with numerous 600cc titles. This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.
This Graves Motorsports Cat Eliminator exhaust is designed for the racer on a budget seeking the closest performance exhaust to our full race system. We did not allow compromises in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range.
We use the same 1.00 MM think wall high heat grade Titanium tubing used on our Superbikes. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeatability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The silencer is one piece with the tail pipe welded to the deep draw tapered Titanium entrance cap and attaches to the collector with a 60.5 MM machined Titanium joint for a perfect fit every time. The Collector attaches to the stock mount under the frame with a Titanium tab that has an 8MM machine Titanium nut welded to the tab. The silencer is hung with a strapless Aluminum bracket and built into the silencer. The silencer sleeve is made of Titanium that attaches to the titanium end caps with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is a stamped Titanium.
This system performs like our superbike pipe and shows like jewelry.
- Chuck Graves
GMS Exhaust systems are designed for the elite rider seeking top of the line performance, fit, finish and value. This R1 exhaust system was developed using the same technology that has powered Monster Energy Graves Yamaha riders to 5 straight consecutive AMA Superbike championships.
- New Diamond Shaped Can Design (Titanium with Titanium end cap), designed to match the R1's body line.
- Cans mount directly to the rearset mount brake using a stealth 100% carbon fiber can strap
- Constructed from Aerospace grade high heat Titanium alloys
- 1 Lambda sensor comes standard
- Advanced welding process showcases laser perfection welds
- 14.4lbs lighter than stock
- Upgradeable to a full system with future kit release
- Performs like a full system, looks like a full system at 50% the cost.
-Stock Can + Cat System Weight = 18.8lbs. : Cat Eliminator System Weight = 4.4lbs. (14.4lb. savings)-
-DB at Idle 93 DB at 5000rpm 113 DB
-Yamaha R1 2015-17
- 2015-2018 Yamaha YZF-R1